It113 Hw 1.1

1)For Ethernet standards, you would reference the IEEE standards embody and the 802.3 series of standards. For cabling standards, you would reference the ANSI/TIA standards body and the ANSI/TIA-568-C series of standards.
2)There are two types of fellowship 6 ancestry: Standard Category 6 and Category 6A (augmented Category 6). Standard Category 6 has a limited bandwidth of 250MHz, objet dart Category 6A has a bandwidth of 500MHz. Since 10Gbps operation is required, Category 6A should be recomm blockadeed to the end user.
3)S/STP cabling, also known as screened fully shielded twisted-pair (S/FTP) should be recommended. This type of cabling offers the best protection from impediment from external sources. Category 6A STP of ScTP cables will perform passing well in this application. Category 7 is an S-STP cable govern in ISO 11801 Ed. 2. Category 7 offers a usable bandwidth to 1000MHz. It faeces also be used for 10 Gigabit Ethernet, 10GBase-Tapplications.
4)Plenum cable is necessary in this space since it shares the space with HVAC systems. Plenum or riser cable groundwork be used.



Although plenum is more than enough, riser cable can be used since it does not share the space with HVAC systems.
5) A) In 1Gbps links there is likely no issue with AXT. Therefore, you should dedicate attention to problems within the cable of a given link. The set-back thing to do is to inspect the ends of the connectors and ensure that the cable has not been untwisted too much.
B) Since AXT is the main type of crosstalk modify 10Gbps performance, make sure the cables are widely spaced asunder and that the use of cable ties is limited. And if ties must be used, use still Velcro ties.If you want to get a full essay, grade it on our website: Orderessay



If you want to get a full essay, wisit our page: write my essay .